Malleable Steel 45 Deg Threaded Elbow
video

Malleable Steel 45 Deg Threaded Elbow

Malleable steel 45 degree elbows, BSPT/NPT threaded or socket weld. Commonly used in gas transmission and distribution pipelines.
Custom sizes are accepted and OEM is welcome. FOB pricing runs from US $1.8 per piece, minimum order 10 pieces.
Send Inquiry
Product Introduction

Malleable Steel 45 Deg Threaded Elbow

Threaded Joints Where Hot Work Is Avoided

These 45 degree malleable steel elbows supply gas transmission and distribution crews who prefer threaded fittings over welded joints. BSPT or NPT threads seal onto standard gas pipe, so a gas contractor needing a 45 degree turn without hot work on site can order these pieces and assemble them with ordinary hand tools. Welding on a gas line often requires a work permit, a purge and fire-watch personnel; threaded assembly removes that step for sections where the line class allows it. The angle redirects above-ground runs around equipment and supports, and the body follows malleable iron construction for gas pipeline service in ordinary pressure and temperature ranges. The listing does not state a pressure class or a certification number, and those blanks are carried into the inquiry rather than filled in.

Gas crews say it plainly: no welding rod, no permit, just a wrench and the right thread. That is the whole reason this end form wins on distribution jobs.

Malleable Steel 45 Deg Threaded Elbow
Threaded malleable steel 45 degree elbow for gas distribution stations and above-ground runs.

Gas Distribution Stations and Metering Skids

Most pieces go into distribution stations, metering skids and above-ground gas runs. A station groups regulators, filters and measurement equipment on one frame, with small lines running between each component; the 45° angle turns those lines around the frame members without a square corner. Metering skids carry the measurement taps and their connecting tubing, where line routing stays compact and accessible for calibration. Above-ground runs follow station fencing and equipment pads, stepping over drains, foundations and other piping. Specific medium and operating pressure are taken from the gas operator's line list; the source record does not name a usage category.

End Form: BSPT/NPT Thread with Weld Option

Standard ends are threaded BSPT or NPT, chosen to match the pipe standard used on the distribution network. A socket weld option exists for the sections where the operator prefers a welded joint, even though most of these orders lean threaded for on-site assembly. Threaded gas joints need a sealant approved for the gas in question, and the joint should be checked after pressure testing for any weep at the thread. The body is held on the wrench flat during assembly to keep the boss from twisting. Thread form must be consistent across the station; mixing BSPT and NPT pieces is a recurring site error that shows up as a seal leak.

Body and Angle for Gas Service

Body material: Malleable Steel, recorded as malleable iron construction for gas pipeline service. Angle: 45 Degree. Model mark: 45 Degree Malleable Steel. Product family: Elbow. The 45° sweep gives a gentle change of direction compared with a 90° turn, which reduces turbulence in the small gas runs that feed instruments and measurement devices. External finish and any corrosion allowance are not specified on the source sheet, so exposed outdoor installations should state their finish requirement on the order.

CategoryNote
Applicable service-
Product familyElbow
FOB unit priceUS $1.8-90 / Piece
Documented certification-
Rating class-
Place of originChina
Minimum orderMin. Order: 10 Pieces
Brand markYH
Delivery schedule-
Model mark45 Degree Malleable Steel
Angular specification45 Degree
End connectionThreaded (BSPT/NPT) / Socket Weld
Body materialMalleable Steel
Fitting kindElbow

Order Quantity and Price Range

FOB price: US $1.8-90 per piece, reflecting the bore and end-type spread of the listing. Minimum order: 10 Pieces. Trademark: YH. Origin: China. Pressure classes, certification and usage remain open on the record, and lead time is confirmed against the purchase order.

Station Piping Layout and Support Practice

Inside a distribution station, the threaded elbows follow the equipment layout drawn on the station plan, turning small lines around regulators, filters and metering instruments without crowding the walkways between them. Above-ground runs are supported on small stands or brackets fixed to the equipment pad, and the elbow sits near the support rather than leaving a long cantilever between two joints that can flex under thermal movement. Metering skids group measurement taps on one frame, and the thread form on every elbow on the skid matches the network standard specified for the station, so seals do not rely on an adapter to bridge BSPT and NPT practice. Gas lines are checked for leakage after assembly using the method the station operator requires, and any weeping thread is broken back, cleaned and re-sealed before the line is put into service. Outdoor exposed bodies rely on the finish specified for the station, since the source record does not define a coating or a corrosion allowance for this listing.

Support the run close to the bend. An unsupported cantilever loosens the thread over time.

Distribution stations sit between transmission mains and local consumer lines, grouping regulators, filters and measurement equipment on one pad where small lines connect each device to the station header. Metering skids carry the measurement taps and their connecting tubing, and the routing on those skids stays compact so calibration and reading access are not blocked by neighboring pipework. Above-ground gas runs follow the station fence and equipment pads, stepping over drains, foundations and other lines as they move between connection points. Threaded assembly on these runs avoids the hot work that a welded joint would require in a commissioned gas area, though the joint still has to meet the station's leak-check procedure before service.

Thread sealants for gas duty are selected against the gas composition and the line pressure, and the compound is applied to the male thread rather than packed into the female end. When a station expands or a meter skid is replaced, the threaded joints on the existing run are opened one at a time, and the replacement pieces are checked against the original bore and thread form before the line is returned to service. The body is held on the wrench flat during tightening, and over-torque is avoided because a malleable boss can crack without obvious external sign. After assembly, the station operator's leak-check method is applied to each joint, and any weeping connection is broken back, cleaned and re-sealed before the line is opened. The exterior finish for exposed station bodies is set by the project specification, since the source record leaves coating and corrosion allowance open.

Hot Tags: Malleable Steel 45 Deg Threaded Elbow, China Malleable Steel 45 Deg Threaded Elbow manufacturers, carbon steel industrial piping components, carbon steel pipe joint fittings, carbon steel plug fittings, carbon steel threaded connector fittings, pipe fitting kit, Seamless Carbon Steel Elbow

Send Inquiry

whatsapp

Phone

E-mail

Inquiry