Stainless Steel Pipe ASTM A312 A269 A213
video

Stainless Steel Pipe ASTM A312 A269 A213

Stainless steel water pipe, made to ASTM A312 / A269 / A213, outer diameters 6mm to 1200mm. Commonly used in industrial wastewater and process water lines.
Custom lengths and specifications are accepted, and OEM is welcome. FOB pricing runs from US $1,000 per piece, minimum order 1 piece.
Send Inquiry
Product Introduction

Stainless Steel Pipe ASTM A312 A269 A213

Four OD groups across the range

The stainless steel water pipe ships for industrial wastewater treatment lines, made to ASTM A312, A269 and A213. Outer diameters span from 6mm up to 1200mm across four size groups, so thin branch lines and large-bore headers can be covered from one stock family. Most sections go into treatment plant pipe racks, pump discharge runs and transmission lines.

Grade references on the alloy body

The alloy body resists the mild aggressive residuals found in wastewater and process water, and the smooth bore keeps suspended matter from lodging along the wall during idle periods. The four OD bands split the range into 6–57mm for small branches and instrument connections, 60–219mm for medium take-offs, 273–630mm for collector mains, and 630–1200mm for the largest headers. Each band pairs with a wall thickness suited to its pressure rating, and mill surfaces are inspected for laps, folds and interior marks before lengths leave finishing. Ends arrive square and chamfered, ready for spool welding without on-site re-beveling.

Before lengths are racked for installation, each bundle is inspected for dents, end squareness and surface defects, and the grade and size tag is matched to the drawing marking so the fitter pulls the right OD and wall at the treatment plant. Mill surfaces are checked for laps, folds and interior marks before lengths leave finishing, and ends arrive square and chamfered so spool welding does not need on-site re-beveling. The alloy body tolerates the mild aggressive residuals found in wastewater and process water, and the smooth bore keeps suspended matter from lodging along the wall during idle periods. Each OD band pairs with a wall thickness suited to its pressure rating, and sections are nested in bundles so thin walls do not buckle under upper-layer weight.

Water pipe entries on the schedule

FieldFigure
Model reference-
Product formWater Pipe
End connection-
Standard referenceASTM A312, ASTM A269, ASTM A213
Body materialStainless Steel
Typical service-
Size rangeOD 6-57mm, 60-219mm, 273-630mm, 630-1200mm
Listed categoryWater Pipe
Pressure rating-
Stainless steel water pipe spanning OD groups for industrial wastewater lines
Stainless steel water pipe in four OD groups for treatment plant racks and pump discharge runs.

Wastewater treatment and process water circuits

An EPC contractor orders thin branches and large headers together. The stock family covers both ends of the diameter range.

Wastewater treatment plants collect process drainage through branch headers, carry spent water to equalization and clarification stages, and transmit treated effluent out through discharge mains. This pipe sits on those collector and transmission circuits, and process water lines feed cooling, wash and service supply between plant units. Pump discharge runs connect station equipment to header networks, and sampling skids pull small-diameter sections for monitoring ports. Inside treatment halls the pipe rides overhead racks above equipment and drops to outlet manifolds; outside, buried and racked runs follow plant corridors with bedding and support chosen to protect the wall from backfill and traffic load.

Pulling branch and header sizes together

Wall and OD are matched to calculated flow and maximum working pressure, with surge allowance added where pump start-up creates a recorded pressure spike. Cut length follows the approved spool list, and custom lengths and specifications are accepted for non-standard routing. Trial orders open at the listed one-piece quantity, with the per-piece bracket and delivery schedule confirmed at booking. Receiving inspects each bundle for dents, end squareness and surface defects before racking, and lengths are tagged with grade and size so crews can match sections against the drawing marking.

Branches and headers come together. Bands are sorted on receipt. The bore stays clean.

OD bands across the wastewater range

Process water lines feed cooling, wash and service supply between plant units, and pump discharge runs connect station equipment to header networks across the treatment site. Sampling skids pull small-diameter sections for monitoring ports, and transmission mains carry treated effluent out to discharge points beyond the treatment buildings. Inside treatment halls the pipe rides overhead racks above equipment and drops to outlet manifolds; outside, buried and racked runs follow plant corridors with bedding and support chosen to protect the wall from backfill and traffic load. Collector and transmission circuits between treatment stages both rely on the same stock family for continuous service.

Branch and header sizes are pulled from the four OD bands on the same order, so thin small-bore take-offs and large collector mains match one supply record rather than two separate purchasing cycles, and the receiving yard sorts lengths by band against the spool drawing. The smooth bore is inspected before stringing, because settled grit on a wastewater line erodes valves and meter chambers once the transmission run fills and pumps start cycling.

Lengths for the treatment plant are nested in bundles so thin walls do not buckle under the weight of upper layers, and end caps protect the square, chamfered ends until the welder lines up the first spool. Receiving inspects each bundle for dents, end squareness and surface laps, and the grade and size tag is matched to the drawing marking before the pipe is racked. The four OD bands cover thin branches and large headers from one stock family, and sections are binned by wall thickness along the storage row. The bore stays clean through transport.

Hot Tags: Stainless Steel Pipe ASTM A312 A269 A213, China Stainless Steel Pipe ASTM A312 A269 A213 manufacturers

Send Inquiry

whatsapp

Phone

E-mail

Inquiry