Galvanized Malleable Iron Pipe Plug
Pressure tested before delivery, we support customization at around 3,000,000 pieces a year. FOB pricing runs US $0.8-1 per piece, minimum order 1,000.
Galvanized Malleable Iron Pipe Plug
Closing a threaded port with a head plug
This galvanized malleable iron head plug closes a male-threaded port on water, gas and fire fittings. It runs DN15 to DN50, male in BSPT or NPT, and passes pressure testing before dispatch. Most pieces go into water, gas and fire screwed fitting assemblies.
Malleable iron body and tested threads
The plug body carries an external male thread that seats into the female port, and the head profile lets a wrench hold the piece while it tightens into place. Malleable iron provides a ductile casting that survives installation torque without cracking, and the galvanized coat protects the body from damp conditions and mild contact with the carried medium. BSPT and NPT thread forms cover the two common screwed standards, and each plug is hydrostatic and air tightness tested before dispatch so a capped port holds pressure once installed. The compact head leaves little protrusion after the port is closed.
Each plug is checked for thread form, head soundness and coating finish before packing, and size marking stays on the body so fitters can identify the closure during later inspection. The malleable casting is examined for cracks or porosity that would fail under tightening torque into the female port, and the galvanized coat is checked for missed patches in exposed locations. The male thread profile is gauged before dispatch and pressure testing confirms the body holds the service tightness required for capped ports, so the sealed port does not weep once installed. The compact head leaves little protrusion after the port is closed.
Plug fitting figures recorded
| Label | Record |
|---|---|
| Model reference | - |
| Product form | Pipe Plug |
| End connection | Male threaded (BSPT / NPT) |
| Standard reference | - |
| Body material | Malleable Iron |
| Typical service | Water, gas and fire threaded lines |
| Size range | DN15 to DN50 |
| Listed category | Plug |
| Pressure rating | - |

Water, gas and fire screwed fitting packages
A wholesaler orders a matched set of pipes, valves and fittings. The plug rounds out the package for capped ports.
Water plumbing and service networks cap spare outlets, drain ports and inspection openings with these plugs, leaving the port ready for a future branch when the system is extended. Gas lines seal test connections and spare screwed branches that stay closed during normal operation, and fire screwed fitting packages supply plugs alongside couplings and elbows for system assembly and repair. Maintenance crews hold plugs in stores for capping isolated sections during repair work, and wholesale supply chains package the fitting with the rest of the screwed component range. Galvanized finish serves exposed and damp locations where zinc protection slows surface corrosion.
Plug selection for capped ports
Plug size follows the port diameter recorded on the piping drawing, and thread standard matches the BSPT or NPT family used on the line. Pressure testing before dispatch confirms the body holds the service tightness required for capped ports, and finish is selected against exposure notes. Opening orders begin at the listed bulk quantity, and the per-piece bracket with delivery window are settled at order entry. Each plug is checked for thread form, head soundness and coating finish before packing, and size marking stays on the body so fitters can identify the closure during later inspection.
Port size sets the plug. Testing confirms tightness. The cap leaves no protrusion.
Tested closure plug body
Maintenance crews hold plugs in stores for capping isolated sections during repair work, and wholesale supply chains package the fitting with the rest of the screwed component range. Gas lines seal test connections and spare screwed branches that stay closed during normal operation, and fire screwed fitting packages supply plugs alongside couplings and elbows for system assembly and repair. Water plumbing and service networks cap spare outlets, drain ports and inspection openings, leaving the port ready for a future branch when the system is extended. Galvanized finish serves exposed and damp locations where zinc protection slows surface corrosion.
Plug size follows the port diameter on the piping drawing, and the BSPT or NPT thread matches the screwed family used on the line, so the closure seals against compatible compound once tightened into the female port. Hydrostatic and air tightness testing before dispatch confirms the body holds the service tightness a capped port requires, and the head profile leaves little protrusion after the connection is closed.
Plugs are stored with thread protection on the male profile so the taper is not nicked during handling, and the BSPT or NPT mark is read against the port standard before the piece caps a water, gas or fire fitting. On water plumbing and service networks these plugs cap spare outlets, drain ports and inspection openings that stay closed during normal operation, leaving the port ready for a future branch when the system is extended, and on gas and fire screwed packages the male thread seals the test connection or spare branch without protruding far past the fitting face. Each plug is gauged before dispatch to confirm the thread seats against the female port. The head leaves little protrusion once installed.
Hot Tags: Galvanized Malleable Iron Pipe Plug, China Galvanized Malleable Iron Pipe Plug manufacturers, high pressure malleable iron fittings, malleable iron fitting hardware, malleable iron pipe coupling set, malleable iron pipe reducer, malleable iron pipeline fittings set, pipe support fittings
You Might Also Like
Send Inquiry














