Plate Flat Welding Flange
video

Plate Flat Welding Flange

Simple Structure: Flat plate shape without long neck design
Welding Method: Adopts fillet weld, inserting the pipe into the flange inner hole and welding on the outer side
Send Inquiry
Product Introduction

Product Name, Attributes & Features:

 

Plate Flat Welding Flange;

1 Stainless Steel Plate Flat Welding Flange DN10-DN2000

2 Carbon Steel PL Flange PN16 GB/T9119 Standard

3 High Quality Flat Welding Pipe Flange RF Face

 

Main Features:

 

 
 

1 Simple Structure:

Flat plate shape without long neck design

 
 
 

2 Welding Method:

Adopts fillet weld, inserting the pipe into the flange inner hole and welding on the outer side

 
 
 

3 Wide Application:

Low cost, simple manufacturing, it is the most widely used flange type in engineering

 

 

DN | Outer Diameter D | Bolt Circle Diameter K | Bolt Hole n×L | Flange Thickness C | Matching Pipe Outer Diameter

PN10 (1.0MPa)

PN16 (1.6MPa)

PL RF DN100 PN16 304 GB/T 9119-2010

  • Full English:Plate Slip-On Flange, RF, DN100, PN16, Stainless Steel 304, GB/T 9119-2010 PL FF DN150 PN10 Q235B HG/T 20592-2009
  • Full English:Plate Slip-On Flange, FF, DN150, PN10, Carbon Steel Q235B, HG/T 20592-2009

Product Parameter

DN

D

K

n×L

C

Matching Pipe OD

50

165

125

4×18

18

57

80

200

160

8×18

20

89

100

220

180

8×18

22

108

150

285

240

8×22

24

159

200

340

295

8×22

26

219

DN

D

K

n×L

C

Matching Pipe OD

50

165

125

4×18

20

57

80

200

160

8×18

22

89

100

220

180

8×18

24

108

150

285

240

8×22

26

159

200

340

295

12×22

28

219

Application Scenarios

Low-pressure water supply and drainage, HVAC, chemical industry, municipal pipelines, fire protection, light industry and other low-vibration, non-flammable and non-explosive systems.

 

Application Scope:

Suitable for medium and low pressure piping systems, widely used in chemical industry, construction, water supply and drainage, petroleum, light industry, refrigeration, fire protection and other basic engineering However, due to its poor rigidity, it is not suitable for high pressure, flammable, explosive and high vacuum requirements

product-609-508

 

Product Advantages

 

1.Low cost:

Simple structure, convenient production, cost-effective price and high cost performance.

2.Easy installation:

Pipe insertion welding design, easy centering and high construction efficiency.

3.Wide adaptability:

Universal for low-pressure systems with various material options to meet different anti-corrosion and strength requirements.

4.Complete standards:

Fully compliant with national, chemical and mechanical industry standards; non-standard sizes are available for customization.

 

Product Details:

 

Product Overview​

The Plate Flat Welding Flange (PL Flange) is a core piping component designed for low-pressure systems, featuring a simple yet robust structure that ensures reliable connection and sealing performance. It is widely recognized for its cost-effectiveness and ease of installation, making it a preferred choice for global industrial and municipal projects.​

 

Core Structural Features​

  • Structural Design: Adopts a one-piece forging or stamping structure with a flat sealing surface (FF) or raised face (RF) as standard. The flange body integrates a welding groove, allowing the pipe to be inserted directly into the inner hole for fillet welding-ensuring precise centering and stable load-bearing capacity.​
  • Sealing Performance: The sealed surface is precision-machined (Ra ≤ 3.2μm) to match gaskets (rubber, asbestos, PTFE, etc.), forming an effective seal that prevents leakage in low-pressure media (water, gas, oil, chemical liquids).​
  • Dimensional Precision: All key dimensions (outer diameter D, bolt circle K, hole size n×L, thickness C) strictly comply with GB/T 9119-2010, HG/T 20592-2009, and JB/T 81-2015 standards. Tolerances are controlled within ±0.5mm to ensure interchangeability with pipes and fittings worldwide.​

 

Manufacturing Process & Quality Control​

 

♦ Material Selection: High-quality raw materials are sourced with complete certification (Mill Test Certificate included). Carbon steel (Q235B, 20#) undergoes pickling and passivation; stainless steel (304/316L) is processed with solution annealing to enhance corrosion resistance.​

♦ Production Craft: Forging/stamping → Precision machining (CNC lathe + milling machine) → Sealing surface finishing → Heat treatment (as needed) → Surface treatment (painting, galvanizing, or passivation) → 100% dimensional inspection.​

 

Quality Assurance: Each flange undergoes strict testing, including:​

 

  • Dimensional verification with coordinate measuring machines (CMM);​
  • Non-destructive testing (NDT) for welding seams (if applicable);​
  • Pressure test (hydrostatic test at 1.5×rated pressure) to ensure no leakage;​
  • Surface defect inspection (no cracks, burrs, or rust).​

 

Installation & Usage Advantages​

 

  • Simplified Installation: No complex alignment tools required-insert the pipe into the flange inner hole (matching pipe OD) and perform fillet welding on both sides, reducing construction time by 30% compared to other flange types.​
  • Low Maintenance: The simple structure minimizes wear and tear; replacement of gaskets or flanges is quick and cost-effective, lowering long-term operational costs.​
  • Safety Reliability: Suitable for low-vibration, non-flammable, and non-explosive systems, with a service life of 8-10 years under normal working conditions (temperature: -20℃~425℃; pressure: ≤1.6MPa).​
product-1024-1024

 

Customization Capabilities​

 

We offer flexible customization to meet special project requirements:

Non-standard sizes (DN15~DN3000, PN2.5~PN40);​
Special materials (alloy steel, duplex steel, Hastelloy);​
Custom sealing faces (FM/M, T/G, RJ) and surface treatments (epoxy coating, anti-corrosion plating).

 

Manufacturing Strength Overview

 

We are a professional manufacturer of Plate Flat Welding Flanges (PL Flanges) with 15+ years of production experience. Our factory covers 8,000㎡, equipped with 30+ sets of advanced production and testing equipment, and an annual output of 500,000+ pieces. We strictly follow GB/T 9119-2010, HG/T 20592-2009, and international standards, providing reliable products for global customers in water supply, chemical, HVAC, and municipal engineering fields.

 

Full Production Process Display

 

1. Raw Material Preparation & Inspection

Material Sourcing: Select high-quality carbon steel (Q235B, 20#, A105), stainless steel (304/316L/321), and alloy steel raw materials from certified suppliers. Each batch of raw materials is accompanied by a Mill Test Certificate (MTC) to ensure traceability.

Pre-inspection: Use ultrasonic testing (UT) and visual inspection to eliminate raw materials with cracks, inclusions, or uneven thickness, ensuring the base material meets mechanical performance requirements.

2. Forging/Stamping Forming

Processing Method: For flanges with DN≥100, adopt hot forging (heating temperature: 1050℃~1200℃) to improve material density and mechanical strength; for DN≤80, use precision stamping to ensure dimensional accuracy.

Equipment Support: 5 sets of 500T-2000T hydraulic forging presses and 8 sets of high-speed stamping machines, realizing automated forming with a processing accuracy of ±0.3mm.

3. Precision Machining

Key Processes: CNC lathes and milling machines complete the processing of outer diameter (D), bolt circle (K), bolt holes (n×L), flange thickness (C), and other key dimensions. The sealing surface (RF/FF) is finished with a precision grinder, achieving a surface roughness of Ra ≤ 3.2μm.

Automation Level: 12 sets of CNC machining centers with automatic tool changing systems, reducing human error and ensuring consistent product quality across batches.

4. Heat Treatment (As Required)

For alloy steel and high-pressure flanges, perform solution annealing, quenching, and tempering to adjust material hardness and toughness. The heat treatment process is controlled by an intelligent temperature control system, with a temperature deviation of ≤±5℃.

Post-heat treatment inspection: Use hardness testing (HB/HRC) and metallographic analysis to confirm the material structure meets standard requirements.

5. Surface Treatment

Carbon Steel Flanges: Pickling and passivation → Anti-rust painting (epoxy resin coating, thickness: 80μm~120μm) or hot-dip galvanizing (zinc layer thickness: ≥85μm) to enhance corrosion resistance.

Stainless Steel Flanges: Passivation treatment to form a protective oxide film, ensuring no rust in humid environments.

6. Strict Quality Inspection

Dimensional Inspection: 100% inspection of key dimensions with Coordinate Measuring Machines (CMM) and vernier calipers, ensuring compliance with standard tolerances.

Non-Destructive Testing (NDT): Welding seams (if applicable) undergo ultrasonic testing (UT) and magnetic particle testing (MT) to detect internal defects.

Hydrostatic Pressure Test: Each flange is tested at 1.5×rated pressure for 30 minutes, with no leakage or deformation allowed.

Surface Defect Inspection: Visual and tactile inspection to eliminate products with cracks, burrs, or uneven coating.

7. Packaging & Delivery

Packaging Standard: Inner layer: Anti-rust paper + plastic film; outer layer: Wooden pallets or cartons (customizable for sea/air shipping). Each package is labeled with product model, material, batch number, and weight for easy identification.

Delivery Capacity: Cooperate with major logistics companies (DHL, FedEx, Maersk) to provide door-to-door service. Sample delivery: 3-5 working days; bulk order delivery: 15-25 working days.

 

Manufacturing Advantages

 

►Automated Production: High degree of automation reduces labor costs and ensures stable product quality.

► Strict Quality Control: Full-process inspection from raw materials to finished products, with 100% qualification rate.

► Customization Capacity: Support non-standard size, material, and surface treatment customization, with a minimum order quantity (MOQ) of 10 pieces.

► Certification Compliance: ISO 9001, CE certified, meeting international export standards.

 

Packaging Solutions:

 

Standard Packaging

1:Inner Protection: Each flange is wrapped with VCI anti-rust paper + transparent PE film to avoid oxidation and scratches during transportation

Middle Fixation: Flanges of the same specification are stacked and fastened with packing straps to prevent displacement and collision

Outer Packaging: Export-standard corrugated cartons (thickness ≥5mm) or plywood pallets (size: 1200×800mm) with anti-slip pads at the bottom

Label Information: Each package is labeled with product model (e.g., PL RF DN100 PN16), material, quantity, gross weight, batch number, and shipping mark (customer-specified)

 

2:Reinforced Packaging(DN≥600)

Inner Protection: VCI paper + PE film + foam buffer layer (wrapping sharp edges of flanges)

Middle Fixation: Rubber gaskets are placed between flanges; the whole stack is fully wrapped with stretch film for better stability

Outer Packaging: Fumigated solid wood pallets (with IPPC mark) + iron reinforcement strips to prevent pallet deformation

Moisture-proof Treatment: 2 packs of desiccant (50g each) are placed in each package to adapt to marine humid environment

Customized Packaging:

Custom packaging available: Neutral packaging, brand packaging (with customer's LOGO), small-batch sample packaging (independent gift boxes)

 

Transportation Methods

 

Cooperating shipping companies: Maersk, COSCO, Hapag-Lloyd; FCL/LCL available; ports covering major global routes(≥500 pieces)(DN≥300)

Cooperating airlines: FedEx, DHL, UPS; Door-to-Door service; easy customs clearance(≤ 100 pieces)

Fast delivery (3-7 working days); full logistics tracking; no self-pickup required(≤50 pieces)

Domestic Transportation

Domestic logistics partners: SF Express, Deppon Express, JD Logistics; door-to-door delivery or self-pickup available

Logistics Guarantee:

  • Packaging Inspection: 100% inspection of packaging firmness before delivery to ensure no damage or rust during transportation
  • Logistics Tracking: Provide bill of lading number/express number for real-time transportation status inquiry​​
  • Damage Compensation: Free replacement or refund for product damage caused by packaging or transportation issues​
  • Delivery Time: Samples: 3-7 working days (international express), 1-3 working days (domestic); Bulk orders: 15-30 working days (sea freight), 5-10 working days (air freight)

 

Core After-Sales Services

 

  • Quality Issue Guarantee:12-month warranty (from delivery date). For non-human-induced quality issues (e.g., substandard material, excessive dimensional deviation, sealing leakage) within the warranty period, free replacement, exchange, or full refund is provided
  • Technical Support Service:24/7 online technical consultation (email, WhatsApp, Skype) to assist with installation, welding, seal matching, etc.; free provision of installation manuals (Chinese/English) and flange selection guidance
  • Return & Exchange Service:If the received product does not match the order specifications (model, material, size) or is damaged during transportation, please provide photo/video evidence within 7 working days after receipt. Unconditional return/exchange is offered upon verification, with round-trip shipping costs borne by us
  • Replacement Parts Service:Free replacement of supporting small parts (bolts, nuts, gaskets, etc.) within the warranty period; cost-only charge for parts beyond the warranty period
  • Lifetime Maintenance Consultation:Free product maintenance consultation is still available after the warranty period to help extend product service life

 

After-Sales Service Process

 

1:Customer feedback (provide order number, product photos/videos, problem description

2:After-sales team responds within 24 hours to verify the problem type

3:Quality/specification issues: Solution (replacement/exchange/refund) provided within 48 hours

4:Technical issues: Immediate guidance; special solution provided within 1-3 working days for complex problems

5:Implement the solution and track customer satisfaction

 

modular-1
After-Sales Guarantee Commitments

1.Response Time: Quick response to customer demands within 24 hours without delay​

2.Solution Rate: 100% problem-solving rate to protect customer rights and interests​

3.Transparent Communication: Synchronize the processing progress throughout to keep customers informed of each step​

4.Long-term Cooperation: Dedicated after-sales specialists for long-term cooperative customers to prioritize needs.

 

Hot Tags: plate flat welding flange, China plate flat welding flange manufacturers, Blind Cast Iron ANSI Flange, Plate Flat Welding Flange, ANSI Anti corrosion Carbon steel flange, ANSI Anti corrosion Stainless steel flange, ASME B16 5 Slip on flange class 600, flange

Send Inquiry

whatsapp

Phone

E-mail

Inquiry