Stainless Steel T-Type Strainer in Pipeline
The T-Type Strainer is a fundamental industrial filtration component used to remove large solid impurities from fluid pipelines, named for its resemblance to the letter "T". Designed for high-pressure reliability, this strainer ensures that downstream equipment such as pumps and meters are protected from debris damage during operation. Its robust construction and distinctive fire-red epoxy finish make it an essential standard for municipal engineering and commercial building water systems.
Product Parameter
| The following table: | |
|
Feature |
Technical Specification |
|
Nominal Diameter |
DN15 – DN400 (1/2" – 16") |
|
Working Pressure |
PN10 / PN16 / PN25 (150 psi – 300 psi) |
|
Body Material |
High-Strength Ductile Iron (GGG50) / Cast Steel / Stainless Steel |
|
Sealing Type |
Resilient Seating (EPDM) or Metal-to-Metal |
|
Connection Standard |
Flanged (ANSI B16.5 / EN1092) or Threaded (NPT) |
|
Operation |
Manual Bolted Cover / Quick-Open Top |
|
Coating |
Fusion Bonded Epoxy (FBE), Min 250μm Thickness |
Product Feature and Application
Efficient Filtration:
Engineered to provide a 100% reliable capture of debris, ensuring no migration of particles into isolated or sensitive zones.
Low Maintenance:
Simple internal architecture allows for long intervals between servicing, even when the strainer remains in a high-flow circuit for years.
Visual Status:
Features optional ports for pressure gauges to allow operators to verify at a glance if the filter element is clogged.
Applications:
Widely used in HVAC water systems, fire pump suction lines, cooling towers, and municipal water main branches.
Product Details
- Corrosion-Resistant Internals: Features a stainless steel filter mesh and support frame to prevent "sticking" or degradation caused by rust.
- Reinforced Body: The heavy-wall cast body is designed to withstand water hammer and pressure surges common in industrial fluid start-ups.
- High-Grade Packing: Utilizes self-lubricating PTFE or high-grade gaskets to ensure the cover remains leak-free throughout its lifecycle.
- Maintenance-Friendly Design: Features a large diameter drain plug for easy removal of collected sediment under system pressure.
Product Display
Isometric View:
Highlighting the high-gloss red protective coating.
Internal Cutaway:
Showing the precision alignment of the filter screen and the flow path.
Installation Layout:
Displayed as a primary protection valve in a typical pump room riser.
Transport Package
- Individual Packing: Each strainer is shrink-wrapped to maintain cleanliness and prevent coating abrasion.
- Crating: Units are secured in reinforced, export-standard wooden crates with moisture-absorbent silica gel packets.
- Security: Flange faces are protected with heavy-duty plastic covers to prevent impact damage during transit.
After-sales Service
Technical Guidance: Provision of installation schematics and torque specifications for cover bolt tightening.
Global Support: 24/7 technical hotline for emergency troubleshooting and rapid dispatch of replacement screens or internal gaskets.
Hot Tags: stainless steel t-type strainer in pipeline, China stainless steel t-type strainer in pipeline manufacturers, Stainless Steel Y Type Strainer For Water Supply, strainer, pipe fittings, 304 316L Stainless Steel Industrial Filtration Device, Stainless Steel Filter high quality, SS304 Duplex Strainer in Pipeline
You Might Also Like
Send Inquiry