Malleable Iron Threaded Bushing DN15
Samples are available and we take custom orders. FOB pricing runs US $0.8-1 per piece, minimum order 1,000 pieces.
Malleable Iron Threaded Bushing DN15
Male-female reduction in one body
This malleable iron threaded bushing steps a screwed joint down between two sizes on gas and chemical lines. It runs DN15 to DN50, male-female in BSPT or NPT, galvanized to an ISO certified finish. Most pieces go into gas, sewage treatment and chemical service.
Malleable iron casting and thread forms
The bushing body combines an external male thread on one end with an internal female thread on the other, so two ports of different diameter join through one compact fitting instead of stacked adapters. Malleable iron delivers a ductile casting that resists cracking under thread tightening torque, a useful property on screwed fittings assembled and reworked over service life. The galvanized coat protects the casting from damp soil and contact with carried gas or liquid, and the ISO reference records the certification basis for the body. BSPT and NPT thread forms cover the two common screwed standards used across utility and plant piping.
Each bushing is inspected for thread form, body soundness and coating finish before packing, and size marking stays on the body so fitters can identify the reduction at a glance during later service. The malleable casting is examined for cracks or porosity that would fail under thread tightening torque, and the galvanized coat is checked for missed patches in damp or soil-contact locations. Male and female thread profiles are gauged before dispatch so the two ports seat evenly, and the wrench flat holds the bushing while the second end screws into its mating part. BSPT and NPT thread forms cover the two common screwed standards used across utility and plant piping.
Bushing entries on the record
| Fitting | Rating |
|---|---|
| Model reference | - |
| Product form | Threaded Bushing |
| End connection | Male-female threaded (BSPT / NPT) |
| Standard reference | ISO |
| Body material | Malleable Iron |
| Typical service | Gas, sewage and chemical lines |
| Size range | DN15 to DN50 |
| Listed category | Bushing |
| Pressure rating | - |

Gas, sewage treatment and chemical line connections
A maintenance fitter states the two thread sizes to join. The bushing reduces the connection on the spot.
Gas distribution and service lines use screwed bushings where meters, regulators and branch take-offs require a size step between main and outlet. Sewage treatment networks connect vent pipes, drain collectors and sample branches through the same malleable body, and chemical plant lines thread dosing and instrument connections onto larger screwed mains. Maintenance crews keep bushings in stock for repair and reconfiguration of existing screwed systems, and wholesalers package the fitting alongside pipes, valves and other screwed components. Galvanized pieces serve damp and exposed locations; black or banded finishes appear where the fitting sits inside covered or indoor installations.
Bushing selection between two thread sizes
Bushing size follows the two thread diameters recorded on the piping drawing, and thread standard matches the BSPT or NPT family already used on the line. Finish is chosen against exposure notes, with galvanized protection for damp or soil contact. Opening orders start at the listed bulk quantity, and the per-piece bracket plus delivery schedule are agreed at order entry. Each bushing is inspected for thread form, body soundness and coating finish before packing, and size marking stays on the body so fitters can identify the reduction at a glance during later service.
Threads match the two ports. Finish suits the exposure. The reduction seats on the spot.
Compact reducer bushing body
Maintenance crews keep bushings in stock for repair and reconfiguration of existing screwed systems, and wholesale supply chains package the fitting alongside pipes, valves and other screwed components. Gas distribution and service lines use screwed bushings where meters, regulators and branch take-offs require a size step between main and outlet. Sewage treatment networks connect vent pipes, drain collectors and sample branches through the same malleable body, and chemical plant lines thread dosing and instrument connections onto larger screwed mains. Galvanized pieces serve damp and exposed locations; other finishes appear where the fitting sits inside covered or indoor installations.
Thread diameters on the bushing match the two ports recorded on the piping drawing, and the BSPT or NPT standard follows the fitting family already on the line, so the fitter does not meet a mismatched taper when the reduction is assembled. Galvanized protection is chosen for damp or soil contact, and thread form and body soundness are inspected before packing so a cracked casting does not fail under tightening torque on the gas or chemical branch.
Bushings in the screwed store are kept by size and thread standard, with thread protection on the male profile, and the BSPT or NPT marking is read against the line standard before the fitting is issued for gas, sewage treatment or chemical service. The malleable casting is examined for cracks or porosity that would fail under tightening torque, and the galvanized coat is checked for missed patches in damp locations. Meter, regulator and branch take-off connections each draw a matched reduction from the rack. The wrench flat holds the bushing during tightening.
Hot Tags: Malleable Iron Threaded Bushing DN15, China Malleable Iron Threaded Bushing DN15 manufacturers, malleable iron pipe network fittings, malleable iron pipe plug, malleable iron pipeline fittings set, malleable iron tee fittings, pipe fastening fittings, pipe support fittings
You Might Also Like
Send Inquiry














