Carbon Steel Q235 Elbow 45 Degree
Custom sizes are accepted and OEM is welcome. FOB pricing runs from US $0.5 per piece, minimum order 10 pieces.
Carbon Steel Q235 Elbow 45 Degree
Shallow-radius bends on petrochemical lines
This carbon steel 45 degree elbow makes shallow directional turns on petrochemical process lines routed between unit racks, pump connections and tower branches. The body sees process fluid, intermediate product and refinery ambient exposure, with the carbon grade matched to the pressure, temperature and service condition recorded on the line specification. Elbows drop onto process headers, pump discharge loops, drain branches and utility connections, listed together on the spool takeoff so the fabrication shop matches radius, OD and wall in one batch. Q235, 20# and A234 WPB are the listed carbon grades; the chosen grade welds to matching steel pipe and carries internal pressure plus support loads, with the plain surface left for the plant corrosion treatment. The specification entry records long radius and short radius options, so the centerline follow distance matches the layout either as a generous bend or a tight one where space on the rack is limited. No usage sector is recorded on the source entry; petrochemical process lines are the described application, with end form, pressure class and certification left open. The listing records the dimensions, end forms and service sectors described in the sections below, and each piece is checked against the order record before it moves to surface inspection and packing.
Radius is chosen on the drawing, not guessed at the shelf. LR and SR elbows do not swap in a built spool.

Q235, 20# and A234 WPB carbon grades
The wetted surface meets the continuous fluid on the line, while the external shell only sees ambient moisture, occasional spray and the support loads from clips, hangers or bedding. Where mixed metals appear in the catalog family, the buyer confirms which metal contacts the fluid, because the outer shell and the wetted parts can differ on the same entry. The plain metal surface is supplied as formed; any paint, wrapping or extra coating follows the plant's own corrosion practice once the piece enters the line. Wall thickness carries internal pressure and the small external loads imposed during installation, and a casting or surface with visible flaws is set aside before assembly or release rather than mixed into the batch. Where the line carries grit, condensate or repeated thermal cycling, the buyer compares the seat, weld or thread condition at each inspection before the body itself is questioned, because the wear parts renew far cheaper than the casting.
The installation environment sets the finish and the inspection interval, since an indoor plant room, an outdoor rack and a buried trench each expose the body to a different mix of moisture and mechanical handling. Support spacing, clip loads and the local corrosion practice are recorded on the project drawing, and the piece is supplied to match those conditions rather than a one-size finish. Temperature cycling and occasional wetting around equipment connections are accounted for when the body grade and wall are chosen for the listed duty.
Refinery contractors check grade marks on arrival. A mixed batch slows every weld pass.
Compare the spool list before closing the joint.
Long radius and short radius centerlines
The fit-up is checked against the neighboring component before the joint closes: end form, thread pitch or bevel preparation must sit flush with the mating pipe, and a mismatch means an extra adapter, reducer or redo inside the cabinet, skid or trench. End protectors and wrapping stay on until the joint is ready to close, because grit on the thread, bevel or gasket face is the usual reason a fresh joint fails its first inspection. The order sheet records nominal size, wall and end condition, and the shop prepares each piece to those dimensions before surface check and packing. Alignment is checked again at receiving on site, where the end squareness and the mating bore are compared against the spool drawing before the line is closed.
Process branches around refinery racks
No certification number is fixed on the source listing; the standard for a given line should be confirmed against the project piping specification before installation. The pressure class field is left open on the source entry, so the rating for the line should follow the design calculation rather than the catalog description. The recorded dimension band is 45 Degree, Long Radius (LR) / Short Radius (SR). The listing leaves some descriptive fields open where the source record carries no fixed value, and those entries are marked as such in the table rather than filled in by assumption. The rating is set against maximum pressure with surge included, not average running pressure, so a class picked on steady flow may weep when reversal or a pressure spike arrives on the line.
Radius and OD check against the spool drawing
The record sheet travels with the batch. Each piece is checked for bore, wall, end squareness and surface condition before packing, and the record sheet follows it through the order. The packed batch is marked with the order reference so receiving inspection on site can match each piece to the spool list without opening every crate. Pieces that fail the end or dimension check go back to the shop rather than being mixed into the shipment. Spare pieces for future maintenance are held in the store by size and form, separate from the batch installed on the current run.
A small trial order is accepted where the listing allows. The recorded minimum stands at 10 pieces. The listed bracket runs US $0.5-99 per piece. Buyers usually send the full size list in one request so the batch can be scheduled together and delivered in one shipment rather than split across several production slots. Each piece in the batch carries the same order reference, which lets receiving inspection sort by size without opening every crate. Where a project needs several branches of the same OD and wall, the whole set is ordered together so fabrication does not stop between sections.
Compare the drawing to the listing before commitment, and confirm bore, end form and rating against the project piping specification once the order list is finalized.
| Component | Marking |
|---|---|
| Listed product pattern | Elbow |
| Body construction metal | Carbon Steel Q235 / 20# / A234 WPB |
| Model or designation on record | 45 Degree Carbon Steel |
| Bore and dimension band | 45 Degree, Long Radius (LR) / Short Radius (SR) |
| Connection form accepted | - |
| Working pressure rating | - |
| Standard reference on file | - |
| Listed service sector | - |
| Catalog product family | Elbow |
Hot Tags: Carbon Steel Q235 Elbow 45 Degree, China Carbon Steel Q235 Elbow 45 Degree manufacturers, carbon steel industrial joint fittings, carbon steel industrial piping components, carbon steel pipe joint fittings, carbon steel plug fittings, pipe fitting kit, pvc pipe fittings
You Might Also Like
Send Inquiry














