Carbon Steel 45 Degree Pipe Elbow
video

Carbon Steel 45 Degree Pipe Elbow

Carbon steel 45 degree elbows, butt weld, threaded or socket weld. Commonly used in offshore platform process lines, pump skids and valve manifolds.
Custom sizes are accepted and OEM is welcome. FOB pricing runs from US $1.8 per piece, minimum order 10 pieces.
Send Inquiry
Product Introduction

Carbon Steel 45 Degree Pipe Elbow

Welded Process Pipework for Offshore Yards

These carbon steel 45 degree pipe elbows ship to offshore engineering yards that build welded process pipework. Butt weld ends give a full-strength joint, with threaded and socket weld ends offered for smaller lines, so a fabricator specifying the joining method receives that exact version. Most go into platform process runs, valve manifolds and pump skids, where welded spools are pre-fabricated in the yard and lifted onto the platform as assembled sections. The 45° angle turns the run around equipment, skid frames and neighboring headers without the sharp offset of a square fitting. The source record leaves pressure class, certification and usage blank, and no rating or standard number is claimed in this description.

Yard fabricators plan the weld prep first, then the spool length. An elbow that does not match that prep comes back to the rack, and everyone loses time.

Carbon Steel 45 Degree Pipe Elbow
Carbon steel 45 degree pipe elbow with butt weld ends for offshore platform process pipework.

Full-Strength Butt Weld and Smaller-Line Alternatives

Butt weld ends prepare for a full penetration weld, matching the main process spool where joint strength matters along the pressure boundary. Socket weld ends take smaller bores into a plain bore sealed by a fillet weld at the mouth. Threaded ends cover the smallest service branches where screw-on assembly is preferred over welding. The choice between the three follows the line class and bore on the fabrication drawing; the fitting is selected to fit that decision rather than drive it. Weld ends are beveled to the prep called out on the spool sketch, and the carbon steel body matches the adjacent pipe in expansion and hardness. Mixed end forms on one order are marked at packing so the fit-up crew can sort them without stopping.

Platform Runs, Manifolds and Pump Skids

Platform process runs carry service fluids along deck racks and between equipment modules, with direction changes planned into the spool during yard fabrication. Valve manifolds group several small lines on one panel, and the elbows turn those lines between the valve block and the external header. Pump skids carry suction and discharge piping along the frame, where the fitting rises off a nozzle and clears the skid rail before meeting the main header. Offshore fabrication happens in a controlled yard before the spool leaves for the platform, so dimensions and end forms are checked against the drawing during assembly. Exposure to salt air after installation is handled by the coating scheme specified on the project, which this record does not define.

Carbon Steel Construction and Angle

Body material: Carbon Steel. Angle: 45 Degree. Model mark: 45 Degree Carbon Steel. End connection: Butt Weld / Threaded / Socket Weld. Product family: Elbow. The 45° sweep suits moderate offsets in a welded rack, where a long run needs to step around an obstruction without a second fitting. The body shares the material of the neighboring welded pipe, so weld procedure and material traceability can follow the same control route as the spool. Exterior finish and corrosion allowance are not listed on the source sheet and are set per project requirement.

GroupFact
Angular specification45 Degree
Applicable service-
Place of originChina
Rating class-
FOB unit priceUS $1.8-90 / Piece
Brand markYH
Body materialCarbon Steel
End connectionButt Weld / Threaded / Socket Weld
Minimum orderMin. Order: 10 Pieces
Model mark45 Degree Carbon Steel
Product familyElbow
Delivery schedule-
Fitting kindElbow
Documented certification-

MOQ, Price and Origin

Minimum order: 10 Pieces. FOB price: US $1.8-90 per piece across the listed size and end-type range. Brand mark: YH. Origin: China. Lead time, pressure class, certification and usage are open fields on the record, settled with the purchase order when the fabrication schedule is confirmed.

Yard Weld Procedure and Traceability

Butt weld joints on platform process spools follow the weld procedure qualified for the pipe material and wall thickness, and the elbow end prep is matched to that procedure before the fit-up tack is laid on the shop floor. Material traceability for the carbon steel body is kept with the spool record, so the installed fitting can be referred back to its mill data when the platform piping is reviewed during inspection or later modification. Smaller service branches use the threaded or socket weld alternatives listed on the record, and those joints follow their own assembly and inspection practice separate from the main butt weld spools. Spool sections are trial-checked in the yard against the rack layout before lift-out, and the fitting positions on the section are verified against the platform drawings once the section is set on deck. The offshore coating scheme, inspection intervals and any project-specific certification requirements are defined by the fabrication package, which this listing does not reproduce.

Match end prep to the weld procedure before tacking. A mismatched bevel fails the joint review.

Yard trial fit checks the spool against the rack layout before lift-out, confirming that the 45° offset lines up with the neighboring headers and that the end prep matches the qualified weld procedure. Spool sections are then sealed for transport to the platform, where the fabricated sections are joined into the final process run. Material traceability for the carbon steel body is kept with the spool record for the life of the installation.

Coating and corrosion protection for exposed offshore bodies follow the project's surface-treatment scheme, which this listing does not define in detail. During platform modification, new spools are trial-checked against the existing rack before being lifted into place, and the carbon steel body on each replacement piece is matched to the weld procedure qualified for the adjacent pipe. Inspection intervals, any required certification, and the pressure class for a given run are established by the fabrication package and the platform engineering documents, not by this product record. Smaller service branches on the same platform use the threaded or socket weld alternatives listed on the record, assembled under their own joint practice separate from the main butt weld spools.

Hot Tags: Carbon Steel 45 Degree Pipe Elbow, China Carbon Steel 45 Degree Pipe Elbow manufacturers, carbon steel adapter fittings, carbon steel pipe fitting, carbon steel pipe joint fittings, carbon steel plug fittings, carbon steel process fittings, pipe fitting kit

Send Inquiry

whatsapp

Phone

E-mail

Inquiry