Galvanized Iron Bridge Drain Cover
Custom sizes and colors are available. FOB price US $1.9-10 per piece, minimum order 10 pieces.
Galvanized Iron Bridge Drain Cover
Bridge walkways and maintenance paths
This drain cover forms bridge walkways and maintenance paths along deck-side access routes, where rain runoff and occasional washdown need an open mesh surface that drains rather than pooling on a solid plate. The listed usage covers drainage and anti-slip service, and cast panels span channel-style openings and access strips along the bridge edge between rail supports and maintenance walkways. Bridge maintenance paths carry inspection crews and light equipment carts along the deck, and the grating surface gives a firm anti-slip step over the open route. Deck-side access sees outdoor weathering, rain and deck washdown, so the cast body is selected to handle repeated wet-and-dry cycling along the structure. The mesh keeps loose tools and debris off the walkway while surface water drains through to the deck drainage below. Rim edges rest on walkway supports at each side, and flush seating keeps the maintenance path level across the grating line.
The drain cover forms bridge edge walkways and maintenance paths. Open mesh drains deck rain runoff through the panel.
Galvanized iron grating on deck-side routes
Body material on the listing is ductile iron with a galvanized finish recorded in the product scope, and listed dimensions read 1.22x3.66 m with thickness 25-50 mm. The panel section spans the deck-side walkway route, and the 25-50 mm bar depth carries inspection crews and light maintenance carts across the opening. Ductile iron gives the casting a shock-tolerant body that withstands bridge vibration and repeated crossing loads without brittle fracture under impact. The galvanized surface provides a corrosion allowance against outdoor moisture, rain washdown and the open-air exposure along the bridge structure. Solid rim bars transfer walkway load to the support ledge at each side, and the panel must sit flat on that ledge to avoid rocking under traffic. Certification on the source sheet reads ISO; joint form and pressure class fields carry no assigned value, and those entries should be confirmed against the bridge maintenance drawing.
Galvanized cast drain cover spans deck-side maintenance routes. Rim load transfers to the walkway support ledges.
Rain runoff over the open mesh
Bridge walkway drainage depends on the open mesh to carry rain off the maintenance path, so runoff drops through the panel rather than running along a solid deck plate and collecting at the path edge. Bar spacing drains surface water while keeping loose tools, gloves and small debris from dropping below the walkway, and the anti-slip composite of the cast surface holds traction when the route is wet from rain. Standard panels measure 1.22 by 3.66 m with 25 to 50 mm thickness, and custom sizes are accepted where a bridge walkway strip falls outside that range. Where the grating meets a railing base, expansion joint or access hatch, the transition edge is dressed flush so maintenance carts do not catch on an uneven rim. Bridge structures settle and move slightly under traffic and temperature change, so rim seating and support condition are checked on inspection rounds, and a rocking panel is reset before wear develops at the seat. After fitting, a walk along the maintenance path verifies flush edges, firm seating and a firm step across each panel.
Open mesh drains rain off the bridge maintenance path. Rim seats are checked against structure movement on inspection rounds.

Panel spans along the bridge edge
Bridge edge walkways follow the structure between rail supports, and drain cover panels are cut to the strip width between those supports along the maintenance path. Panel spans follow the beam layout shown on the bridge drawing, and rim seats must be flat on each support so the panel does not shift under crew traffic. Where the route passes a pier or cross frame, the panel end is trimmed to that structure edge and side gaps are sealed against runoff working under the panel. Outdoor exposure along the bridge keeps the casting in wet-and-dry cycling, and the galvanized coating is inspected on maintenance rounds for local damage at bar ends and rim seats that needs touch-up. The casting family serves inspection walkways and light equipment cart crossing; heavier vehicle loads should be confirmed against the site specification before selection. Certification record ISO; model reference and usage beyond drainage, anti-slip remain open on the source sheet.
The drain cover spans follow the bridge beam support layout. Galvanized coating is inspected on maintenance rounds.
| Edge | Bed |
|---|---|
| Brand mark | YH |
| Body material | Ductile Iron |
| Listed dimensions | 1.22x3.66 m, thickness 25-50 mm |
| Certification record | ISO |
| Minimum order | Min. Order: 10 Pieces |
| Listed form | - |
| Product category | Grating |
| Price bracket | US $1.9-10 / Piece |
| Country of origin | China |
| Joint form | - |
| Load class field | - |
| Intended service | Drainage, Anti-Slip |
| Delivery window | - |
| Model reference | - |
Bridge access grating selection
FOB pricing on the listing runs US $1.9-10 per piece with a minimum order of 10 pieces; the delivery window field carries no assigned value, so production scheduling is agreed with the buyer at order confirmation. Brand mark YH, origin China, product type grating; the type field and model reference carry no assigned value on the source sheet. Listed dimensions 1.22x3.66 m, thickness 25-50 mm; certification record ISO; usage drainage, anti-slip. Custom sizes are accepted where bridge walkway geometry falls outside the standard panel family. Before shipment the shop checks panel dimensions, bar seating and casting records against the listed thickness range. A trial order can start at the listed floor quantity; commercial figures sit in the table, and drawings should note walkway strip width, panel span and exposure condition before production opens.
Ten pieces is the listed order floor. Bridge panels follow the maintenance path support layout.
Hot Tags: Galvanized Iron Bridge Drain Cover, China Galvanized Iron Bridge Drain Cover manufacturers, Anti slip Steel Grating Drain Grate, cast iron storm grate, Debris resistant drain grate, Resin drain grate, street drain grate, surface drainage storm grate
You Might Also Like
Send Inquiry














